Topics




Rating Summary
Sizing of Genset
Major Customer
Rating Definition
Prime Power
Stand by Power
Continuous Power
Enquiries
General Enquiries
Sales Enquiries
Service Issues

You are here: Standard AMF Panel Specification : AMF Panel Specification  15 KVA

 
SPECIFICATION FOR STANDARD AMF PANEL 15 KVA
Cubicle type, base mounting control panel with hinged doors, undrilled bottom gland plate, AL. Bus Bar and accommodating the following:
  SWITCH GEARS:
32A, 4 Pole Contactor for ALTERNATOR with Thermal O/L relay
32A, 4 Pole Contactor for MAINS (OPTIONAL)
BACK-UP PROTECTION:
MCB for short circuit protection
 
MICROPROCESSOR BASED AMF MODULE INCORPORATING:
Functions:
Supply Failure Timer
Restoration Timer
3 Impulse automatic engine Start / Stop logic & engine fails to start lockout
Mains / Generator Voltage & Frequency Sensing.
 
Multifunctional Meter with Scrolling Readings for
Water Temperature/ Oil Pressure
Voltage / Ampere/ Frequency / kW / kVA
Running-hour counter
Electronic kWH meter (Counter Display)
Current Transformers
 
Indications (LED):
DG ON, Load on DG
Mains ON, Load on Mains, Battery Charger ON
 
Push Buttons (AMF MODULE BY PASS MODE)
Engine START / STOP ( Provided on Engine Controller )
Generator Contactor CLOSE / TRIP
Mains Contactor CLOSE / TRIP (If provided)
Fault ACCEPT / RESET
 
BATTERY CHARGER:
SMPS Based Unit with inbuilt Auto/Manual & Float/Boost Facility
DC Voltmeter & Ammeter (Separate)
 
PLHO / 0712/RKS/ASN